Papers - MINETA Takahiro
-
Review - Materials Design for Improving Mechanical Properties of Ultra-Lightweight Mg-Li Based Alloys
Takahiro Mineta
Materials Transactions 2024.2
-
Transition of superplastic and dislocation creep of duplex Mg–Li–Al–Zn alloy
Takahiro Mineta, Haruto Saijo, Seita Shibata, Seri Nakaya, Hiroyuki Sato
Materials Science and Engineering: A 886 145714 2023.9
-
Materials design for improving mechanical properties of ultra-lightweight Mg-Li based alloys
73 297 - 306 2023.7
-
高純度マグネシウムを用いた医療用インプラント製造技術の開発
井上誠, 上田恭介, 峯田才寛, 会田哲夫, 松島稔, 山口一良
まてりあ 2023.2
-
Effect of strain-induced grain boundary migration on microstructure and creep behavior of extruded AZ31 magnesium alloy prepared by pre-compression and annealing treatment
Takahiro Mineta, Ryusuke Suzumura, Akihiro Konya, Hiroyuki Sato
Materials Today Communications 34 105502 2023.1
-
二相Mg-Li基合金の高温クリープにおける超塑性挙動
西條陽斗, 峯田才寛, 佐藤裕之
M&M材料力学カンファレンス講演論文集 2022.9
-
微細粉末を用いて作製したZn焼結体の塑性異方性および圧縮変形挙動
三橋亮太, 長山航平, 峯田才寛, 佐藤裕之
M&M材料力学カンファレンス講演論文集 2022.9
-
予圧縮及び熱処理によるAZ31合金押出材の組織変化とクリープ強度の改善
鈴村隆介, 紺谷尭弘, 峯田才寛, 佐藤裕之
M&M材料力学カンファレンス講演論文集 2022.9
-
0.7Tm近傍におけるA5052合金のスモールパンチクリープ変形挙動および変形組織
野坂尚生, 峯田才寛, 徳永透子, 佐藤裕之
M&M材料力学カンファレンス講演論文集 2022.9
-
Cantor合金の合金型クリープにおける変形組織
渋谷草太, 沼田尚也, 高橋快生, 峯田才寛, 佐藤裕之
M&M材料力学カンファレンス講演論文集 2022.9
-
Analysis of indentation stress-strain response of copper by in-situ observation using optical indentation microscopy
Takahiro Mineta
15 100547 2022.7
-
High temperature creep deformation behavior of heat-treated (α+β)-Mg-9Li-4Al-1Zn alloy
Takahiro Mineta, Haruto Saijo, Hiroyuki Sato
Journal of Alloys and Compounds 910 164938 2022.4
-
Preparation of Ultra High Purity Magnesium Sheet by Vacuum Distillation, Extrusion and Forging
Keito Mizuhara, Makoto Inoue, Tetsuo Aida, Kyosuke Ueda, Takahiro Mineta, Hiromi Miura
Transactions on GIGAKU 8 ( 1 ) 08003-1 - 08003-6 2021.7
-
Effect of passivation treatment and arc current on the properties of Zn fine particles prepared by arc plasma method
Takahiro Mineta, Shintaro Torii, Kohei Nagayama, Hiroyuki Sato
Powder Technology 308 1 - 6 2021.4
-
Dependence of the mechanical properties and microstructure of ultralight magnesium–lithium–aluminum alloy on heat treatment conditions
Takahiro Mineta, Kazuma Kumatani, Hiroki Adachi, Hiroyuki Sato
Material Science and Engineering Technology 2021.2
-
加工熱処理によるMg-Li-Al合金の機械特性改善
峯田才寛, 長谷川薫, 佐藤裕之
軽金属 2020.7
-
Surface treatment and electron backscatter diffraction (EBSD) analysis of the body-centered cubic phase in Mg-Li based alloys processed by severe plastic deformation
Takahiro Mineta
Micron 2020.6
-
HCP型およびBCC型Mg合金の機械特性
峯田才寛
まてりあ 2020.2
-
新たなin situ圧子圧入法としての改良型顕微インデンテーション法の開発と応用
峯田才寛, 三浦誠司, 岡和彦, 宮島達也
日本金属学会誌 2020.1
-
High strength and plastic deformability of Mg-Li-Al alloy with dual BCC phase produced by a combination of heat treatment and multi-directional forging in channel die
Takahiro Mineta, Kaoru Hasegawa, Hiroyuki Sato
Materials Science and Engineering: A 773 138867 2019.12
-
Anode-Side Failure of a Cuprous Oxide Semiconductor Caused by High-Density Current Loading
Takeshi Moriwaki, Kazuhiko Sasagawa, Yusuke Sugawara, Kazuhiro Fujisaki, Takahiro Mineta
Journal of Electronic Materials 48 ( 11 ) 6949 - 6953 2019.8
-
Application of Modified Optical Indentation Microscopy as New In Situ Indentation Method
Takahiro Mineta, Seiji Miura, Kazuhiko Oka, Tatsuya Miyajima
Materials Transactions 2019.3
-
Structure and Mechanical Properties of Nanocrystalline Silver Prepared by Spark Plasma Sintering
2019.3
-
Preparation of Silver Nanoparticles by Arc Plasma Method and Their Properties
Takahiro Mineta, Tatsuya Saito, Takahiro Yoshihara, Hiroyuki Sato
Materials Transactions 2019.2
-
Powder Properties of Ag Nanoparticles Prepared by Arc Plasma Method
Takahiro Mineta, Tatsuya Saito, Takahiro Yoshihara, Hiroyuki Sato
Journal of the Japan Institute of Metals and Materials 4 ( 60 ) 2018.12
-
Simultaneously Improved Mechanical Properties and Corrosion Resistance of Mg-Li-Al Alloy Produced by Severe Plastic Deformation
Takahiro Mineta, Hiroyuki Sato
Materials Science and Engineering: A ( 735 ) 418 - 422 2018.11
-
Plastic Deformation Behavior of Mg-Y Alloy Single Crystals Observed Using In Situ Brinell Indentation
Takahiro Mineta, Seiji Miura, Kazuhiko Oka, Tatsuya Miyajima
Materials Transactions 59 ( 4 ) 2018.3
-
改良型顕微インデンテーション法によるMg単結晶及び多結晶における変形挙動のその場観察
峯田才寛, 三浦誠司, 岡和彦, 宮島達也, 佐藤裕之
M&M材料力学カンファレンス講演論文集 2017.10
-
Observation of Plastic Deformation Behavior of Mg-Y Alloy Single-Crystals by Using In-Situ Brinell Indentation
Takahiro Mineta, Seiji Miura, Kazuhiko Oka, Tatsuya Miyajima
Journal of the Japan Institute of Metals and Materials 81 ( 4 ) 196 - 205 2017.4
-
Factors controlling pseudoelasticity of Mg alloys
Takahiro Mineta, Seiji Miura, Ken-ichi Ikeda
The proceedings of The 9th Pacific Rim International Conference on Advanced Materials and Processing 9 810 - 813 2016.8
-
Evaluation of Critical Resolved Shear Stresses for Various Plastic Deformation Mechanisms To Understand Mechanical Properties of Magnesium-Yttrium Alloys
Takahiro Mineta, Seiji Miura
MRS Online Proceedings Library 1741 AA02 - AA04 2015.1
-
Pure-Shear Test for Investigation of Non-Basal Slip System Operation of Mg Alloy Single Crystal with and without Y
Takahiro Mineta, Seiji Miura, Toshiji Mukai, Mikito Ueda, Tetsuo Mohri
Journal of the Japan Institute of Metals and Materials 77 ( 10 ) 466 - 472 2013.10