Affiliation
Graduate School of Science and Technology Research Division
SATO HIROYUKI
Degree
-
工学博士
-
工学修士
-
工学士
Research Interests
-
High Temperature deformation
-
High Temperature deformation
-
heat resistant materials
-
Dislocation
-
Creep
-
Aluminum Alloys
-
Intermetallic Compounds
-
高温変形
-
高温変形
-
金属間化合物
-
転位
-
耐熱材料
-
微細構造
-
固溶強化
-
マグネシウム合金
-
クリープ変形
-
アルミニウム合金
-
Solution Hardening
-
micro structure
-
Magnesium Alloys
Research Areas
-
Nanotechnology/Materials / Metallic material properties
-
Nanotechnology/Materials / Inorganic materials and properties
-
Nanotechnology/Materials / Structural materials and functional materials
Professional Memberships
-
American Society of Mechanical Engineers (ASME)
-
The Minerals, Metals & Materials Society, (TMS)
-
日本圧力容器研究会議・高温強度基準値検討委員会
-
日本機械学会
-
日本鉄鋼協会
-
軽金属学会
-
日本金属学会
-
鉄鋼協会
-
金属学会
-
軽金属学会
-
日本機械学会
Papers
-
Creep deformation behavior and microstructure of α-Mg/long-period stacking ordered (LPSO) duplex Mg-Y-Zn alloy prepared by hot extrusion and heat treatment
Mineta Takahiro, Takahashi Daisuke, Bando Wataru, Sato Hiroyuki, Hagihara Koji, Yamasaki Michiaki
MATERIALS TODAY COMMUNICATIONS 39 2024.6
-
Residual Stresses in Polycrystalline Iron Alloys Measured by X-ray Diffraction and Related Microstructure
Suzuki Shigeru, Sato Shigeo, Imashuku Susumu, Sato Hiroyuki, Tanaka Shun-ichiro
Tetsu-to-Hagane advpub ( 0 ) 2024
-
Transition of superplastic and dislocation creep of duplex Mg–Li–Al–Zn alloy
Takahiro Mineta, Haruto Saijo, Seita Shibata, Seri Nakaya, Hiroyuki Sato
Materials Science and Engineering: A 886 145714 - 145714 2023.10
-
Effect of strain-induced grain boundary migration on microstructure and creep behavior of extruded AZ31 magnesium alloy prepared by pre-compression and annealing treatment
T. Mineta, R. Suzumura, A. Konya, H. Sato
Materials Today Communications 34 105502 2023
-
High temperature creep deformation behavior of heat-treated (α+β)-Mg-9Li-4Al-1Zn alloy
Takahiro Mineta, Haruto Saijo, Hiroyuki Sato
Journal of Alloys and Compounds 910 ( 910 ) 164938 2022.7
-
Small punch creep behavior and microstructure of A5052 alloy at around 0.7Tm
NOZAKA Naoki, MINETA Takahiro, TOKUNAGA Toko, SATO Hiroyuki
The Proceedings of the Materials and Mechanics Conference 2022 ( 0 ) OS0401 2022
-
Plastic anisotropy and compressive deformation behavior of Zinc prepared by sintering using fine particles
MITSUHASHI Ryota, NAGAYAMA Kohei, MINETA Takahiro, SATO Hiroyuki
The Proceedings of the Materials and Mechanics Conference 2022 ( 0 ) OS0630 2022
-
Microstructure control and creep resistance improvement of AZ31 extruded rod by precompression and heat treatment
SUZUMURA Ryusuke, KONYA Akihiro, MINETA Takahiro, SATO Hiroyuki
The Proceedings of the Materials and Mechanics Conference 2022 ( 0 ) OS0605 2022
-
Deformation structure in Alloy-type creep of Cantor alloy
SHIBUTANI Souta, NUMATA Naoya, TAKAHASHI Yoshiki, MINETA Takahiro, SATO Hiroyuki
The Proceedings of the Materials and Mechanics Conference 2022 ( 0 ) OS0619 2022
-
Effect of passivation treatment and arc current on the properties of Zn fine particles prepared by arc plasma method
Mineta Takahiro, Torii Shintaro, Nagayama Kohei, Sato Hiroyuki
POWDER TECHNOLOGY 388 1 - 6 2021.8
-
Dependence of the mechanical properties and microstructure of ultralight magnesium–lithium–aluminum alloy on heat treatment conditions
Takahiro Mineta, Kazuma Kumatani, Hiroki Adachi, Hiroyuki Sato
Material Science and Engineering Technology 52 ( 3 ) 339 - 345 2021.3
-
High strength and plastic deformability of Mg-Li-Al alloy with dual BCC phase produced by a combination of heat treatment and multi-directional forging in channel die
Mineta Takahiro, Hasegawa Kaoru, Sato Hiroyuki
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 773 2020.1
-
Structure and Mechanical Properties of Nanocrystalline Silver Prepared by Spark Plasma Sintering
Takahiro Mineta, Tatsuya Saito, Takahiro Yoshihara, Hiroyuki Sato
754 258 - 264 2019.4
-
Preparation of Silver Nanoparticles by Arc Plasma Method and Their Properties
Mineta Takahiro, Saito Tatsuya, Yoshihara Takahiro, Sato Hiroyuki
MATERIALS TRANSACTIONS 60 ( 4 ) 569 - 573 2019.4
-
Powder Properties of Ag Nanoparticles Prepared by Arc Plasma Method
Mineta Takahiro, Saito Tatsuya, Yoshihara Takahiro, Sato Hiroyuki
Journal of the Japan Institute of Metals and Materials 83 ( 4 ) 119 - 123 2019.4
-
Creep characteristics and microstructure of magnesium alloys
Hiroyuki Sato, Takahiro Mineta
93 ( 1247 ) 1 - 4 2023.12
-
Turning Point of Common Sense
SATO Hiroyuki
Journal of JSEE 68 ( 3 ) 3_1 - 3_1 2020
-
On the physical basis of a Larson-Miller constant of 20
K. Maruyama∗, F. Abe, H. Sato, J. Shimojo, N. Sekido, K. Yoshimi
International Journal of Pressure Vessels and Piping 159 93 - 100 2018.1
-
Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index
Hiroyuki Sato
Key Engineering Materials 741 99 - 104 2017.4
-
Extrapolation of Creep Curve and Creep Rate by Strain Acceleration Parameter in Al-Mg Solid Solutions
Hiroyuki Sato, Kosuke Omote, and Akira Sato
Materials Science Forum 794-796 307 - 312 2014.6
-
Formation of Microstructural Gradient of AA2017 by RBT at Ambient Temperature
Kouki Ueno, Akira Sato and Hiroyuki Sato
Materials Science Forum 794-796 1233 - 1238 2014.6
-
Partitioning and Evaluation of Creep Curve of Cu-Al Solid Solutions by Strain Acceleration and Transition Objective Index
53 111 - 116 2014.4
-
Extrapolation of Sigmoidal Creep Curve by Strain Acceleration Parameter
Hiroyuki Sato, Kosuke Omote, Akira Sato, and Kouki Ueno
Key Engineering Materials 592-593 606 - 609 2014.4
-
Distribution of residual stresses in 1070 single phase aluminum with grain size gradient formed by RBT treatment
Y. Enomoto, T. Nishimura, H. Sato and S.-I. Tanaka
Materials Science Forum 768-769 343 - 350 2013.4
-
Comparison of internal and residual stresses measured by strain-dip test and XRD during high temperature deformation of Al-Mg solid solutions
H. Sato, Y. Enomoto, K. Omote, and S.-I. Tanaka
Materials Science Forum 768-769 351 - 357 2013.4
-
Analysys of Creep Curve by Strain Acceleration Parameter in Sinter of Ultrafine SUS304 Particle Made by Arc Plasma Method
H.Sato, K.Otaka, Y.Enomoto and K.Omote
Proc. of the Intern. Workshop on Bulk Nanostructured Metal 2012.6
-
Characterization of planer cathode-supported SOFC prepared by a dual dry pressing method
Gang Chen, Hong-Xin You, Yutaka Kasai, Hiroyuki Sato, Abuliti Abudula
J.of Alloys and Compounds 509 5159 - 5162 2011.4
-
EXTRAPOLATION OF CREEP CURVE AND CREEP LIFE PREDICTION FROM SECONDARY CREEP BY EVALUATION OF STRAIN RATE CHANGE
Hiroyuki Sato
Proceedings of the ASME 2010 Power Conference POWER2010 27336 2010.10
-
Phenomenological approach to precise creep life prediction bymeans of quantitative evaluation of strain rate acceleration in secondary creep
Hiroyuki Sato and Takaya Miyano
Journal of Physics: Conference Series 240 012089 2010.8
-
ひずみ加速因子によるクリープ速度変化の定量化と寿命予測
佐藤裕之，藤田健司
軽金属 60 ( 7 ) 353 - 355 2010.7
-
Proposal of New Evaluation Method of Creep Behavior by means of Quantification of Strain Rate Change in Secondary Creep
Hiroyuki Sato
Processing and Fabrication of Advanced Materials - XVIII 1 451 - 460 2009.12
-
Transition of acceleration behavior and life time prediction of Mg-Al solution hardened alloys at around 0.6Tm
Hiroyuki Sato, Takaya Miyano
Multilevel Approach to Fracture of Materials, Components and Structures, ECF 17 1103 - 1110 2008.9
-
Quantitative evaluation of creep curve of alloy-type and metal-type creep in magnesium-aluminum binary alloys at around 0.6Tm
Hiroyuki Sato
TMS2008, Supplemental Proceedings Structural Materials Division 3 199 - 204 2008.3
-
Quantitative Evaluation of Acceleration Creep in Magnesium-Aluminum Alloys at 0.65Tm
Hiroyuki Sato
European Conference of Fracture, Fracture of Nano and Engineering Materials and Structures 17 558 2006.7
-
高温変形におけるクリープ構成式の最適選択に関する情報論的検討
佐藤裕之,宮野尚哉
電気学会 電子・情報・システム部門大会講演論文集 304 OS2-5 2003.10
Books
-
プロフェッショナル英和辞典,スペッドテラ
編集:星野守，執筆者216名
小学館 2004.6
Review Papers
-
常識の変わり目
佐藤 裕之
工学教育 68 ( 3 ) 1 - 1 2020.6
-
クリープ挙動といわゆる仮想的初ひずみ速度
佐藤裕之
高温強度基準値に関する調査研究報告書 33 - 48 2005.3
-
雪国に無雪道路を実現させる自動車部品 －エンジン廃熱利用の道路融雪法－
上田恭嗣，伊藤昭彦，佐藤裕之，渡辺義見
バウンダリー 20 ( 12 ) 20 - 31 2004.12
Awards
-
日本金属学会学術貢献賞
2017.09
-
日本金属学会東北支部「優秀賞」
2015.12
Social Activities
-
青森県大規模小売店舗立地審議会委員
2003.05 - 2012.08